Patton - Pedal Risers

thingiverse

<strong>2023-08-15: Refined these risers a bit, made them a bit shorter and moved the holes for the grub screws a bit so that you can fit longer grubs screws.</strong> Pedal risers for the Patton stock pedals. Pedal risers add ergonomic comfort for your toes and also increase grip with grub screws. The Patton stock pedals have a bit of recessed shape so these risers need a small support piece underneath for adhesive to stick well, I also chose to secure the risers with 2 zip-ties per riser just to make sure that they sit in place firmly. The grub screws are M5, you can use M5x8mm or M5x10mm depending on how long you need.. Print in PLA, you want these to be solid so print with X Walls and 100% infill to make them solid, the holes for the grub screws have threads in them so it can be advantageous to print with line width not higher than 0.5mm. <strong>Installation:</strong> -First clean/de-grease the pedal in the area where the riser will be installed -Install double sided tape on the pieces as pictured in the photo -First attach the adhesive support part to the pedal as pictured in the photo -Before you install the riser it's best to screw in the grub screws as it's easier to do this before installation, don't screw them all the way in! There needs to be some space for the pedal spikes -Next attach the riser on top of the pedal, everything should be aligning so that the existing spikes on the pedal slots perfectly into the riser and everything should be snug and flat and not feel loose -When the riser is installed add 2 zip-ties, I've used 3.5*150mm zip-ties which I cut afterwards, shorter might not work, 3.5mm is the best width