patin vccnc gas 1'' - vccnc gas or sch 1' ' sliding block

thingiverse

Here's the rewritten text in American English: Edit: I forgot to share the fusion link https://a360.co/36jcJoQ The sliding block for 1'' ID steel tube rolls over 33.4-33.7 mm OD TUBE using 6082RS bearings. It is designed so two tubes can be bolted together for more stiffness, and the rail still runs clear over it, or to use as a base a 20x0 profile. This thing works by joining these modules together using 4mm threaded rods. There are three versions. One of them is a stiffer version that lacks the folding hole on the middle. Another one has a 0.2 mm offset on one of the rollers to the middle, which is meant to fix some issues you may have with your machine (so please, square your machine before printing any of these). If your machine isn't properly squared, you might print this one by one in the middle of the bed, so all the modules will be exactly the same. An offset of 0.05 on one of the wheels will make them not get in contact with the tube, but that can be fixed with vertical holes to open the wheels and a horizontal hole to increase precharge on the rail. It works really fine, but remember the gas pipe tube (IRAM 2502) has a fine layer of black/grey oxide that peels away fast, so you might have to fix the pre-charge of the rail eventually. You may also get better pipes like the ASTM A53 1'' ones - they rock. The wall width can range from 2.77mm to 9.09mm for stiff A.F. The XXL wall width is really expensive, so you might just get the cheap one and use a 20mm aluminum profile.