Parts for acquire

prusaprinters

<p>Board, grid pieces and hotel markers for the board game acquire. I printed the board mostly in black, with a colour change to white at 1.8mm and back to black at 2.8mm (so the letters are readable). The pieces I printed in white, with a change to black at 4.6mm and change back at 5.6mm, to get the inverse effect on the pieces.</p> <p>I inset holes in the board quarters for 5x5x1mm magnets, which I got for a few pounds from ebay. I hot-glued most of them, but after one fell out I reglued it with superglue. I think superglue is the better choice.</p> <p>The hotel parts are designed from the cards available <a href="https://waterbeargames.com/games/acquire/">at water bear games</a>, and I printed them in the colours used on those cards.</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Prusa</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Prusa Mk2</p></div> <p><strong>Rafts:</strong></p> <p>No</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div> <p><strong>Resolution:</strong></p> <p>0.2mm</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>15-45%</p></div> <p><strong>Notes:</strong></p> <p>The board and pieces I printed with 20% infill (though there's not much of it).</p> <p>The hotel markers I printed with 45% infill for the lowest 10mm, and 15% infill for the remainder (Using 10mm-high-modifer.stl as a modifier in slic3r). I was hoping they'd have a noticable extra weight at the base and be less susceptible to being knocked over. I'm not convinced it's made any difference though.</p> </p></p></p> Category: Games