Parktor Speckenbüttel in Bremerhaven

prusaprinters

Das Parktor zum Speckenbütteler Park im Norden von Bremerhaven wurde 1896 vom Leher Stadtbaumeister Heinrich Lagershausen erbaut. Seit 2009 steht es unter Denkmalschutz. This portal to a park in the north of Bremerhaven was built in 1896 and is a protected monument since 2009. The painted model in the photos is in the scale 1:160. Wikipedia photo by wikimedia user Garitzko Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 V2 Rafts: No Supports: Yes Resolution: 0.2 mm Infill: 5% gyroid Filament: SAKATA 3D PLA GRANITE Notes: Supports from the build plate up are needed for the stairs on the backside of the model. Most other parts should print fine without support, but I recommend supports under the main gate and the side portals. The scale of the model in the files is 10:1, 1 mm in the file corresponds to 1 cm in reality. In order to print it at scale you will need to scale it again in your slicer: 0.8% in the slicer will give you a 1:1250 scale model 6.25% in the slicer will give you a 1:160 scale model (N scale) 8.33% in the slicer will give you a 1:120 scale model (TT scale) 10% in the slicer will give you a 1:100 scale model 11.5% in the slicer will give you a 1:87 scale model (HO scale) How I Designed This I designed the model from several own and public photos of the building from different angles. In the main openScad file there is a parameter for the diameter of the railing at the stairs on the backside which could be adjusted depending on your intended print size. There are some additional include files for the shape of several rotational extrudes in the model which need to be present when processing the file. These are the shapes of the upper parts of the round towers, the border decoration at half-height of the upper building and the inner cut at the ceiling of the main gate. Category: Buildings & Structures