Parkflyer Skinny Eye Y / 18650 Li-Ion 4S

thingiverse

This Y4 copter was designed for FPV flying. The copter is powered with a 4S Li-Ion battery and has a flight time of approximately ten minutes. Parts can be found here: https://www.parkflyer.eu/store/ The building instructions will follow. Recommended setup: 1400 KV motors 15A, 4 in 1, ESCs Eachine TX05 transmitter F3 Omnibus flight controller 4S Li-Ion 2600mAh 35A discharge battery 6" propellers Bolts and nuts: M3 x 30 mm bolts, three pieces M3 nuts, three pieces M3 x 16 mm bolts, five pieces M3 x 10 mm bolts, one piece M3 x 10 mm rivet nuts, six aluminum pieces M2 x 10 mm bolts, four to eight pieces M2 nuts, four to eight pieces M3 washers, six pieces M4 x 6 mm grub screws, one piece Arms: Carbon tube 16 x 150mm, two pieces