Parametric Modular Shelf or Bin

thingiverse

DISCLAIMER: This is my first parametric "customizer" thing so if things are not working, just wait until I figure it out. :) I hate that on tight shelf spaces, I have to lift up things to see what they are. In my bar, my pantry, etc. So I built a parameterized attachable shelf that you can configure in different ways and attach together with pins. Alternatively, you can also use the same system to create a set of bins for drawers. In the picture, I only used a single row of 80mmx80mm square shelves with 40mm height to elevate the back row of bottles so I can see their labels. I will be printing another taller but thinner set to elevate another row in the back. Printed shelf-top on the build plate to avoid any support. Pins printed on their side. I used 2 per edge but you can do more or less depending on your size. Infill does not matter if you don't have the walls thicker than your wall count can cover. Easy to print unless you go very large. Then you have to consider that corners might lift as you print the first few layers.