Parametric LED Profile Clip

thingiverse

# Parametric LED Profile Holder Clip This is a parametric LED profile holder clip designed in OpenSCAD, offering some parameters for customization. It's a remix of [marr89](https://www.thingiverse.com/marr89)'s [LED profile clip with screw hole](https://www.thingiverse.com/thing:3234245). The default settings are set for LED profiles with a width of 18mm and a height of 7mm, usually holding a 10mm LED strip. The attached STL-file (`LED Profile Holder Clip.stl`) has been rendered using these settings. ## Parameter Overview ### General Parameters - **Inner Width**: Set the inner width of the clip in [mm]. This is the outer width of the LED profile plus a small margin (i.e. +0.1mm) to make it snap in more easily. - **Inner Height**: Set the inner height of the clip in [mm]. This is the outer height of the LED profile plus a small margin (i.e. +0.1mm) to make it snap in more easily. - **Length**: This is the length of the clip itself in [mm]. - **Shell Thickness**: Set the thickness of the arms and gripping ledge in [mm]. - **Shell Backing Thickness**: Set the thickness of the back of the clip in [mm]. We found that having less than 2mm can cause issues while printing. ### Gripping Ledge Settings - **Gripping Ledge Size**: Set the size of the gripping ledge in [mm]. - **Gripping Ledge Snap**: Enable snap-on for the gripping ledge. ### Screw Settings - **Screw Diameter**: Set the diameter of the hole for the screw in [mm]. - **Screw Head Diameter**: Set the diameter of the screw head in [mm]. - **Screw Head Height**: Set the height of the screw head in [mm] ## History - 2019-12-04: Initial upload.