Parametric dovetail organizer: boxes, bins, drawers. all vase mode prints.

thingiverse

Major Update 2019-June-28 - See Notes Below... A fully customizable organizer that lets you create a single box or bin, or a drawer. Combine them to make a scalable organizer. All printed in vase mode with a .4 nozzle using a .6 width. These are very sturdy unless you go really big. I've included a simple snap-fit drawer pull made using a heated rod to install the drawer pull. No glue is necessary. Let me know if you have any problems printing or fitting the samples. Installation: Unzip obiscad.zip to an /obiscad folder in the same folder as dovetailbox.scad Usage Notes: Boxes, bins and drawers are made based on a reference cube that has dovetails added and subtracted on the X and Y axis. Entering [X,Y,Z]=[40,50,70] will give you a 40x50x70 box with dovetails attached to two sides and dovetails subtracted from two sides for final dimensions: [40+dovetail, 50+dovetail, 70] Drawers will be correspondingly smaller in the opposite direction since they need to fit inside the box which has had inner dovetails subtracted. Then there is the added difference of the drawer gap which makes the drawer smaller still for an easy fit. 2019-June-28 I moved all of the beveling to the obiscad beveling library https://www.thingiverse.com/thing:30336. Most of the bevels scale cleanly now with changes to the box dimensions... The left and right beveling on the bin angled cuts still need to be tweaked a little when you resize the bin. This process is much easier now. Enable debugBinBevels and change the bevel correction parameters. If anyone manages to anchor the angled cut bevels openingLeft / openingRight / bottomLeft / bottomRight in module doveBin() to the cut edges correctly please let me know how and I'll update the source.