Parameterized Zip Tie Mount

prusaprinters

<p>This is a screw mounted zip tie mount.</p><p>It fits 4mm DIN screws, but you can edit the .scad file to make it fit any screw or zip tie.</p><p>To customize, you will need <a href="https://openscad.org/">OpenScad</a> and the dimensions relevant for customizing (just measure them but account for a little clearance, .5mm worked for me). Then get the .scad file, open it and fill in your dimensions at the top. All dimensions are in millimeters.</p><p>This thing was inspired by <a href="https://www.thingiverse.com/thing:4981711">Thing 4981711</a>, but designed from scratch, as it didn't fit my usecase.</p><h3>Print Settings</h3><p><strong>Supports:&nbsp;</strong></p><p>No</p><p><strong>Resolution:</strong></p><p>.2</p><p><strong>Perimeters:</strong></p><p>5</p><p><strong>Infill:&nbsp;</strong></p><p>50%</p><p><strong>Filament:</strong>&nbsp;</p><p>PETG</p><p><strong>Notes:</strong></p><p>I used PETG and 5 walls to print this. However, you should be fine using PLA or something else.</p><p>This prints pretty well with the small side down, but if bed adhesion is an issue, the other way around should work, too.</p>