Paragliding Line Check hand Tools

thingiverse

Human: Paraglider cord length monitoring devices, laser distance. The device is available in two versions. Version 1: (Traditional): the worm by inserting a certification weight up and raise tension on the cord. Versions 2: a hitelesítíttű spring (in our case it is a pulling force produces 5kg was spring) so stretched and tension to the cord. More laser target used. The target can be set to strap the mounting position M3 screws. Normally it is currently in a good location not be changed after assembly. Accessories: 2 x Screw M3x8mm M8x100mm screws 3 pieces 4 x M8 nuts M8x120mm Screw 1pc M4x35mm Screw 3pc 3x M4 nuts 2 x 608 bearing (8x22x7mm) pulley 5kg certified 1pc spring 20 1/4 inch screws for fixing the laser distance meter gauge sheet Laser Rangefinder: Laser Distance Measurer Meter Meter K3 100m Bluetooth Laser https://www.aliexpress.com/store/product/Mileseey-K3-100M-Laser-Rangefinder-OEM-Laser-Distance-Meter-Bluetooth-Digital-Rangefinder-Smart-mOS-With-Color/1754497_32455907707.html?spm=2114.12010612.0.0.ytgebQ Paraglider cord length monitoring devices, laser distance meter devices are available in two versions. The traditional version uses a certification weight to raise tension on the cord by inserting a worm. The second version uses a certified spring that produces 5kg of pulling force, stretching and tightening the cord. More laser targets can be used, set with M3 screws for mounting position straps. Normally, this location is good after assembly and does not need to be changed. Accessories include: 2 x Screw M3x8mm 3 pieces M8x100mm screws 4 x M8 nuts 1 piece M8x120mm Screw 3 pieces M4x35mm Screws 3 x M4 nuts 2 x 608 bearings (8x22x7mm) pulleys 1 piece 5kg certified spring 20 1/4 inch screws for fixing the laser distance meter gauge sheet. The Laser Rangefinder used is the Mileseey K3 Distance Measurer Meter Laser Meter 100m Bluetooth. https://www.aliexpress.com/store/product/Mileseey-K3-100M-Laser-Rangefinder-OEM-Laser-Distance-Meter-Bluetooth-Digital-Rangefinder-Smart-mOS-With-Color/1754497_32455907707.html?spm=2114.12010612.0.0.ytgebQ Print Settings: Printer: Aurora Z605/MK8 Rafts: No Supports: Yes Resolution: 0.3mm Infill: 40-80% Notes: ABS and PLA, short yes, supports yes, zsinormero_kocsi_villa v5.stl Post-printing settings are available for the paraglider cord length monitoring devices.