Panic / Any Key for Cherry MX Switches (e.g. Ducky One 2)

prusaprinters

<p>Recently I bought a new Ducky One 2 SF keyboard. I just love the Cherry MX switches and the exchangable keycaps. Of course I need to make some keycaps myself.</p> <p>So I made a Panic-key and an Any-Key.</p> <p>The Panic-key is a replacement for the original Esc-key. The Any-key replaces the right Alt-Key. I designed two Panic-key and let you choose which one looks better. For a special translucent effect the bottom of the letter area is very thin so that light from beneath shines trough. Without light the keys are completely black.</p> <p>The keycaps should fit on any keyboard with Cherry MX switches though the design of my keys is made especially for the Ducky One 2 series.</p> <p>Important: These keys are not meant to be printed on FDM-printers. It might work but for best results use a SLA-printer like Anycubic Photon, Elegoo Mars, etc.</p> <p>HowTo for best results:</p> <ul> <li>Print at a 30° angle, use supports where necessary.</li> <li>Wash and cure the parts (SLA only).</li> <li>Paint only the letter area in a color of your choice (repeat 2x).</li> <li>Let the paint dry.</li> <li>Remove the excess paint by wet sanding (400 grit).</li> <li>Wet sand the whole part. Start at 600 grit and go all the way to 2500 grit.</li> <li>Do not dry sand! This will result in white scratchmarks.</li> <li>Polish the key with 4000 grit.</li> <li>Install your brand new key.</li> <li>Don't Panic!</li> </ul> Category: Computer