Panel Mount - 3.8" TFT

thingiverse

How to Mount a 3.8" TFT with No Mounting Points? Matrix Orbital EVE2, EVE3, and Parallel 24-bit RGB displays come without tabs or PCBs for mounting, so how do you secure them? It's Easy! You have a flat surface where you want to attach your beautiful TFT. You could machine the back to allow attaching from the rear, but this would require a machine shop and finishing touches. This bezel is an attractive and simple solution for mounting from the front instead. Links: * Matrix Orbital EVE2 SPI TFT: https://www.matrixorbital.com/eve2-38a * Matrix Orbital EVE3 SPI TFT: https://www.matrixorbital.com/eve3-38a * Matrix Orbital Parallel 24-bit RGB TFT: https://www.matrixorbital.com/MOP-TFT480116-38A * Mounting Parts Kit: https://www.matrixorbital.com/accessories/mounting/MKDIY3D Panel Prep and Assembly: The TFT is attached to the bezel without additional hardware. The bezel is designed for the resistive (TPR) version of the display only at this time. The panel is held in place by small recesses on one side and 3D printed "Slip-Clips" inserted into slots on the other side. The clips can be inserted upside down to tension them slightly and hold the display tight. The panel is prepared by cutting a rough hole in the middle of the display area and drilling four holes in the corners to match the 3D print. A printable drill guide is included in this package. The TFT bezel is then placed into the holes and secured with hardware (see link above). The 3D printed bezel covers the holes, creating a nice finished look. Options: The bezel comes with two options: Flat - This option has square edges on the front for easy one-material printing. Smooth - This option has smooth edges, which are nice but difficult to print on a one-material printer. The rounded edge tends to print distorted and may require Bondo and painting (see this post: [How To Finish](http://www.lcdforums.com/forums/viewtopic.php?f=4&t=6711)). If you have a two-material printer or print at [Shapeways](https://www.shapeways.com/product/FER646QUE/matrix-orbital-3-8-quot-smooth-bezel-mount-rev1-0), the smooth option may look great straight off the printer.