Paint Stand with Brush Holes

prusaprinters

<p>Hi y'all!</p><p>Here is a remix of ironhardt's paint holder (<a href="https://www.thingiverse.com/thing:3566632">https://www.thingiverse.com/thing:3566632</a>). I am new to 3D printing and modeling so I wanted to create a paint tray that could hold my brushes and paints, but I only have a few! So I took to thingiverse to find something to what I was looking for. I used ironhardt's design and came up with this.</p><p>First, I used Meshmixer to plane cut the model to only include the front holes. I then loaded the .stl into Fusion 360 and just added the holes at the top for the paintbrushes. The paintbrush set I have is just a basic one from Target. I measured with calipers the width of the thickest brush and used that number to sketch the circles in Fusion. I then used sweep to extrude the circles to the base of the model.</p><p>The circles for the paint measure 40.34mm/4.034cm. The holes for the paintbrush measure 6.35mm/.635cm.</p><p>In the picture, the shorter paints measures just about 40mm and the smaller white one measures about 33mm.</p><p>And voila! Here we are. My first remix!</p><p>If you have any questions let me know!</p><h3>Print Settings</h3><p><strong>Printer Brand:</strong></p><p>Creality</p><p><strong>Printer:</strong></p><p>Ender 3</p><p><strong>Rafts:</strong></p><p>No</p><p><strong>Supports:</strong></p><p>No</p><p><strong>Infill:</strong></p><p>10%</p><p><strong>Filament:</strong></p><p><a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=eSun+PLA">eSun PLA</a></p><p>Blue</p>