P5 Muto II Wide-Angle Pinhole camera

prusaprinters

This is a remix of Schlem's excellent Muto pinhole camera. While I loved the idea of the original, I was not too keen on how heavily it relies on tape for light-proofing. So I designed a new front for it. The hex plate now has a pretty solid light trap so that if tape is used, it's just for holding it if it ever comes loose. I also re-designed the shutter so that it's easier to operate. The pinhole is now held by a small retaining disk so that it's more secure than ever. I also changed the tripod mounts by a set of Manfrotto PL200 compatible quick release tripod plates. If you want to use a 1/4-20 screw instead, you can use the P5 Muto original parts. I printed the front plate with 20% infill. The hex plate was printed at 20% infill with a brim as the exterior baffle is not very wide. The shutter was printed at 20% infill. The retaining disk is printed at 20% infill with a brim as it tends to get loose on the glass plate. The parts fit together very tightly so a good de-burring and light sanding is required. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Resolution: Standard 0.2 Infill: 20% Filament: AMZ3D PLA Black Category: Camera