P201 Rubber Band Gun

thingiverse

Introducing a redesign of oggcraft.jp's P201 Rubber Band Gun, adapted for use on Printrbot+ printers. This modified version is equipped with 10-shot semi-automatic capabilities. To create this design, the user split long parts into sections that could be printed separately and glued together. The STL files were designed to fit within a 200mm bed for easy printing. Printing instructions include printing all components with 4 solid layers and 40% infill at a 0.25mm layer thickness. Rear and front body parts (RBG_Body-Front.stl and RBG_Body-Rear.stl) require support printing, while RBG-Release-L.stl and RBG-Release-R.stl can be printed simultaneously, ensuring the correct positioning of raised portions. Assembly involves cleaning supports from body parts, gluing rear and front body sections together, fitting the ratchet into the slide-end, and aligning the slide trigger. The user must ensure a minimum 12mm clearance for the trigger slide. Finally, load 10 rubber bands and test the gun's functionality. If necessary, make adjustments to correct any issues. Lastly, attach the remaining side covers. Enjoy your new semi-automatic rubber band gun!