P1P TPU Profile Configurations - Black Overture TPU

prusaprinters

**This original config was made by Florian Greco, I just adjusted the config to be more in line for P1P usage**The files in this post are made to be imported to Bambu Studio or Orca Slicer (I am using Orca Slicer), and can be used as potentially optimal profiles for the Printer, Filament, and Processing of the print. As a breakdown:Bambu Lab P1P 0.4 Reduced Poop.json: This config is for the printer. I just wanted to reduce the amount of “poop” the P1P extrudes at the beginning of prints. Went from 50mm to 25mm.Overture TPU - Black.json: This config is the filament. The print shown above is done with recently opened TPU from Overture (like the morning before posting this), so if you get different results with blobs/underextruding, dry your filament.0.20mm Standard - TPU.json: This config is for all the process settings. Basically, the main thing is that the printer will be printing slow. It needs to to be able to print TPU reliably.This print was made with only the part cooling fan, no enclosure or auxiliary cooling fan. I also am running stock everything else, so whatever machine you got out of the box, this profile should be close enough to work. To import configs, go up to File > Import… > Import Configs. None of these profile names should overlap with existing ones, but in case it does, save your old ones under a new name.