Outer Wilds Echoes of the Eye - Sealed Vault
thingiverse
THINGIVERSE IS BROKEN. GET THIS MODEL ON PRINTABLES.COM https://www.printables.com/model/407192-outer-wilds-echoes-of-the-eye-sealed-vault This is a model of the sealed vault from Outer Wilds - Echoes of the Eye. It's obviously not an exact replica as I took some artistic licence to make it printable. Designed in Fusion 360, with some decoration added in Blender. Printing instructions =============== The Vault - I was able to print this standing upside-down, supports from build plate only. Nothing complicated. Try and use a filament that is not translucent when printed. The Seals - These are more complicated. Print face down with no supports. You need two filament colours, and both should be translucent once printed (I tried using a filament that wasn't very translucent and it didn't look good). I used a Grey colour and a White. Use an M600 filament change to isolate the layer at the back that you want to be most translucent. So, in my case, it went Grey → White → Grey (two filament changes). I tried to take a screenshot in PrusaSlicer to show what I mean. I used this LED strip. Literally just stuffed it inside the model - Criacr LED Strip Light, 1 M 30 LED USB TV Backlight, 19 Modes, 20 Colors, IP65 Waterproof USB Bias Lighting Kits with Remote Control, Changing Lighting Strip for Home, TV, Party, Christmas, Decoration : Amazon.co.uk: Lighting
With this file you will be able to print Outer Wilds Echoes of the Eye - Sealed Vault with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Outer Wilds Echoes of the Eye - Sealed Vault.