Outdoor Spotlight Lithophane Holder

prusaprinters

<p>My wife's dog had to be put down last month due to an unexplained illness. I made an outdoor memorial lithophane using a solar led spotlight. We plan on putting it where we will spreading the ashes.</p> <h3>Print instructions</h3><h3>Category: Outdoor &amp; Garden Print Settings</h3> <p><strong>Printer Brand:</strong> MK3</p> <p><strong>Printer:</strong> <a href="http://amzn.to/2DxjZlB">Prusa i3</a></p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> No</p> <p><strong>Resolution:</strong> .2</p> <p><strong>Infill:</strong> 15</p> <p><strong>Filament:</strong> ESun ePC Black<br/> <strong>Notes:</strong></p> <p>It's best if you print the holder in a dark non-translucent material that can withstand being outside. I would also recommend that the lithophane be printed in the same fashion. PETG should hold up pretty well.</p> <h3> How I Designed This</h3> <p>I used <a href="http://3dp.rocks/lithophane/">http://3dp.rocks/lithophane/</a> to make my lithophane. The model settings that I used are as follows...<br/> Max Size 150mm<br/> Thickness 2.5mm<br/> Border 3mm<br/> Thinnest Layer .08mm<br/> Make sure that you download the "Outer Curve" version.</p> <p>I will have to apologize. I can't remember exactly which light this is. I know that I bought it last fall. I believe that it's this one but not entirely sure. I'm fairly sure that it's this one<br/> <a href="https://www.acehardware.com/departments/lighting-and-electrical/outdoor-lighting/landscape-and-deck-lighting/3637535">https://www.acehardware.com/departments/lighting-and-electrical/outdoor-lighting/landscape-and-deck-lighting/3637535</a>. This may not fit everyone's style of spotlight.<br/> I found that the screws needed to be just a little bit longer to make a really good fit. I also added some hot glue between the holder and the inside ring of the spotlight.</p>