Outdoor PVC Projector Mount

prusaprinters

This is a projector mount utilizing ~21.5mm PVC pipe meant for outdoor use. I've only tested with the VANKYO Performance V700W projector, as that is what we have, but mounting holes should be similar. Let me know if there are other mounting hole options that I can add! What to PrintYou can determine how high up the top brace is from the ground, depending on how stable you want it to be. The PVC pipes from the top brace have to bend out a little to fit around the base in order to give it some tension.There are small wedges/hooks you can put on the PVC pipe legs to wedge between patio decking for added stability.There are 5-degree wedges (5th picture) that you can add in between the projector and the projector mount in order to adjust its projector angle. I used 3 on mine.You'll need long M4 screws (or whatever screw your projector uses) to secure the projector to the projector stand between the wedges, depending on how many wedges you end up using.PrintingMaterialOutdoor use: ABS/ASAIndoor use: PLA+Strength10-15% infill3 walls4 top/bottomsMaterials Required~21.5mm PVC pipeM4x25-50 screws or equivalent for your projector Happy printing!