(OUTDATED!) FGC6FA v2 beta testing update package

prusaprinters

<p>(update note) I will be uploading new parts soon. I got the impression that the bolts sits a bit to high now. so I need to lower the nozzle again a bit. since I got a bit of trouble getting to fully cycle since there to much air leaking this way. so there is not enough power. so I will try to find the right balance before making another big upload of parts again… that cost me to much time to do only to figure out that is doesn't work for me to start with. and it's a waste for you testing it out. so know it's in the works. but I want to test is my self first.<br><br>______________<br><br><br>I was getting some feed back that people had trouble getting there FGC6FA to work.<br>after giving mine a closer look did I see that some parts dit not match 100% in hight or distance. giving the system unnecessary friction. this should be resolved with this update package. but how will this effect the spring settings? because the other model did have a very tight air seal at the nozzle and mag. but I think this needs to be resolved with a update like this since this was also a issue for the making of the FGC6. and solved now with this update. did I create a new problem by doing this?</p><p>so first of all get your self the new barrel retainer here:<br>https://www.printables.com/model/150178-we-tech-g-series-barrel-adapter-for-the-fgc6-mkii-</p><p>I think that the F1 5mm is a good starting point to go with. if you still find that it's grabbing the nozzle to hard. then go with a higher number like F1.8mm making the barrel go 1.8mm forward. if you find that it needs a better air sail make it go backwards by picking a lower number 1.3mm</p><p>second of you will need to modify the lower so the mag can sit right in the magwell.&nbsp;<br>more info can be found here<br>https://www.printables.com/model/87710-fgc6af-lower-logo-designs-set<br>https://www.printables.com/model/87700-fgc6af-disconnect-upgrade-set</p><p>then replace the stock parts with these parts. the fire pin is optional. I have not tested this modded fire pin but it should work fine. it will give a little bit more contact area to the bolt.&nbsp;<br>&nbsp;</p>