Ortur Obsidian - GCODE

thingiverse

Its My GCODE what i use. Mein GCODE was is so nutze. ------------Start Code----------------------- G21 ; set units to millimeters G90 ; use absolute positioning M82 ; absolute extrusion mode M104 S{material_print_temperature_layer_0} ; set extruder temp M140 S{material_bed_temperature_layer_0} ; set bed temp M190 S{material_bed_temperature_layer_0} ; wait for bed temp M109 S{material_print_temperature_layer_0} ; wait for extruder temp G28 X0 Y0 ;move X/Y to min endstops G28 Z0 ;move Z to min endstops ;G29 ;auto level G0 X0 Y15 F9000 ; Go to front G0 Z0.15 ; Drop to bed G92 E0 ; zero the extruded length G1 X40 E25 F500 ; Extrude 25mm of filament in a 4cm line G92 E0 ; zero the extruded length G1 E-1 F500 ; Retract a little G1 X80 F4000 ; Quickly wipe away from the filament line G1 Z0.3 ; Raise and begin printing. --------------------EndCode------------------------- M104 S0 ; turn off extruder M140 S0 ; turn off heatbed M107 ; turn off fan G91 ; relative positioning G1 Z25 ; raise head 25mm G90 ; back to absolute positioning G1 X0 Y220; home X axis and push Y forward M84 ; disable motors ----------------------------------------------------------