Ortur Laser Master 2 Pro - Cable Support + AirAssist hose support

prusaprinters

It bothered me that the cabling of the laser module on the Ortur Laser Master 2 Pro was sagging. Sometimes the (lighter) material placed under the laser was touched by this and shifted.Therefore I constructed a cable support for the OLM 2 Pro. The connecting cable now rests on this support and the working area of the laser always remains free :-))Since the cable support is about 50 cm long, I had to split it (left + right) because otherwise it would not have fit on my 3D printer.I then glued the two parts together with the connector and super glue.The support is fixed with one M3x6 and one M3x10 screw. I attached the cable holder to the laser module carriage with two M8 nuts.The connecting cable was fixed with cable ties. Update 1     03 Dec 2022Since I now use a self-constructed AirAssist system for my Ortur, I have changed the cable support (now version v2): First, bottom and side walls are 2mm thick (instead of 1mm) to make them more stable. On the other hand I put a middle wall to separate electric cable and air hose when moving.Of course, you can use the modified cable support without any AirAssist. Update 2     28 Sep 2023Both cable supports (left + right; now version v3) are slightly modified for better fit. They are minimally shorter with oval holes on the sides.I have constructed a more stable connector_v3. My cable support with the old connector_v2 had bent downwards in the middle over time (due to the movement of the cable and air hose). I fixed the new connector_v3 in the middle under both cable supports with superglue; the 4 holes should match.