Orca 0.4x Dual Direct Extruder(PG35L)

thingiverse

Original Text: I have a dual-extruder to remodel the "http://www.thingiverse.com/thing:38515". There is a need to change the control board RAMPS, etc. will not work in "Generation 6 Electronics" board. Instructions Parts required assembly M3x60 bolt - 8 M3x30 bolt - 4 M3x20 bolt - 4 M3 Washer - 12 M3 Nut - 16 M4x15 bolt - 2 + 4 M4 Washer - 8 M4 Nut - 2 + 4 624ZZ bearings - 2 603ZZ bearings - 4 extruderspring - 8 (8mm×30mm) Mk7 Drive Gear - 2 PG35L-048 - 2 Mendel-Parts Hotend v10 - 2 How to make 1) Print a parts 2) Drill a hole of 5mm X carriage with "rcx_orca042-hole_R". *** Attention to both sides of the plate when drilling! ! 3) Assemble the parts 4) Enjoy Configuration information "Configuration.h" define DEFAULT_AXIS_STEPS_PER_UNIT {32.03, 32.03, 960, 467.5} // (1/8 Step) define DEFAULT_AXIS_STEPS_PER_UNIT {64.35, 64.35, 1920, 835} // (1/16 Step) Rewritten Text: The "http://www.thingiverse.com/thing:38515" needs a dual-extruder makeover; replace the RAMPS control board as Generation 6 Electronics boards won't work otherwise. Assemble these parts: 8 M3x60 bolts, 4 M3x30 bolts, 4 M3x20 bolts, 12 M3 washers, 16 M3 nuts, 2+4 M4x15 bolts, 8 M4 washers, 2+4 M4 nuts, 2 624ZZ bearings, 4 603ZZ bearings, 8 extruderspring (8mm x 30mm), 2 Mk7 Drive Gears, and 2 PG35L-048s. Follow these steps: print the parts, drill a 5mm hole in the X carriage with "rcx_orca042-hole_R", assemble everything, and enjoy! Configuration details can be found in "Configuration.h". Choose between (1/8 Step) or (1/16 Step) for DEFAULT_AXIS_STEPS_PER_UNIT: {32.03, 32.03, 960, 467.5} and {64.35, 64.35, 1920, 835}, respectively.