Orbiter extruder adapter for Anycubic Kossel Linear 3D delta printer

thingiverse

Hi! This is an adapter to fit the Orbiter extruder to anycubic kossel linear delta type 3D printers and not only. I have developed two types of simple adapters to fit on the original hotend solution the Orbiter v1.2 CR and Orviter v1.5 version. Second is a mockup of an existing effector design using a V6 hotend and the Orbiter v1.5. Here is the original design" https://www.thingiverse.com/thing:4329200 **This thing has not been tested yet so any feedback to improve the adapters are welcome. Please test it with caution, not to damage the rods in case they hit the extruder stepper motor** **From my point of view the number one concern is that the Orbiter v1.5 will hit the rods limiting the effective print area.** **In case you already have an Orbiter V1.5, which turns out that it cannot be fitted because hots the rods, one solution would be to print the Orbiter CR version housing and latch (PETG, Nylon), and use the rest of the components from the Orbiter v1.5.** **Assembly Hints** The adapter is mounted on the top of the hotend case using the four screws which holds the hotend in place. You might need longer screws (by at least 3mm). Before mounting the adapter inset in the two bottom slots two M3 nuts which will hold the Orbiter in place (see next picture). Insert a short PTFE tube between the Orbiter and your hotend. [Join our Facebook support group!](https://www.facebook.com/groups/705637896767655)