Orbiter Bear Mount

prusaprinters

<p>I've updated the mount so you could use a BLTouch as well for a Volcano HE or a V6 HE.</p><p>UPDATE 8/18/2021: I purchased a Orbiter V1.5 and adjusted the mount to fit (mounting holes were slightly different). Also you will have to cut a new length of PTFE tubing to 54.50mm to work with this version. I've now included a tool for cutting the PTFE tube to the correct lengths for each version.</p><p>I recently purchased an Orbiter Extruder kit and needed a mount for it. I currently use the BearExxa on my Bear Clone and I didn't want to really change too much from that design as it make things easy to disassemble when needing to change parts.</p><p>So I came up with this simple mount for the Orbiter. The mount is a remix of the BearExxa Body and mounts to the original Bear x-carriage. Unfortunately you will lose the Filament sensor (I'd really like to redesign the body to where I could include this).</p><p>For the PTFE tube you will have to cut it down to 40mm for it to work with this mount.</p><h3>Print Settings</h3><p><strong>Printer:</strong></p><p>Prusa Bear Clone</p><p> </p><p><strong>Rafts: </strong></p><p>No</p><p><strong>Supports:</strong></p><p> </p><p>No</p><p> </p><p><strong>Resolution: </strong></p><p>0.28mm</p><p><strong>Infill:</strong></p><p> </p><p>20%</p><p><strong>Filament:</strong> Priline Carbon Fiber PC Black <br/> </p><p><strong>Notes: </strong></p><p>I used Greg's print parameters (4 perimeters, 5 top and bottom, 20% infill), I only changed the layer height as I'm using a 0.6mm Volcano Nozzle</p><p> </p><p> </p><p> </p><p>Category: 3D Printer Extruders</p>