Orbiter 2.0 mount for Prusa mini mosquito mount
prusaprinters
<p>This is a remix of my orbiter 2.0 mount for the Mini.<br>which is a remix of Paul Chase's 1.5 mount</p><p>This has been modified to fit the Mosquito mount found here. <a href="https://www.prusaprinters.org/prints/37387-mosquito-mount-for-prusa-mini">https://www.prusaprinters.org/prints/37387-mosquito-mount-for-prusa-mini</a></p><p>E-steps can be set in the official mini firmware<br>the E-step value is 690</p><p>added to starting Gcode as the mini will not save these settings<br><br>;start orbiter settings<br>M201 E10000 ;acceleration mm/s2<br>M203 E120 ;max speed mm/s<br>M205 E5 ;E jerk mm/s<br>M906 T0 E850 ;TMC motor RMS current in mA<br>;end orbiter settings</p><p>the official LDO motor runs at 850mA</p><p>Printed on my Prusa mini+ with SunLu White PETG with no supports<br>Infil: 15% .20 layer height with a .04 Nozzle</p>
With this file you will be able to print Orbiter 2.0 mount for Prusa mini mosquito mount with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Orbiter 2.0 mount for Prusa mini mosquito mount.