Orange Pi PC2 case
thingiverse
Credit to <B>powermos</B> Original files were revised to reveal USART header, provide improved access to GPIO header, and enable display connector lead to be threaded out of the enclosure. The screw and nut holes were widened, certain cutout sizes and position adjustments were made to better fit the Orange Pi PC2 board (my own at least) and ventilation holes were added on the sides. Notes: Printed on Anet A6, 0.4mm nozzle, 0.2mm layer thickness. Support is required for one of the corners of the top lid, the vent arches have a single line support "built-in" that easily breaks off. My printout features 3 bottom and 4 top solid layers with 30% infill in between to save time, so especially the top part feels slightly too flexible/fragile on its own but it seems fine when screwed together.
With this file you will be able to print Orange Pi PC2 case with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Orange Pi PC2 case.