Oral-B Multiple Charger & Holder.

thingiverse

**Guaranteed design:** All my designs I printed on my Ender 3 v2 Neo and use myself. - - - This is a complete rebuild on a existing design. The original had so many flaws that I decided to completely start over. Still kudos for original designer: https://www.thingiverse.com/thing:4530460 This design has 1 power Cable, 3 Charge stations, holders for 5 brushes. This design does not need Glue (original did) and can be screwed together by using M4 inserts. Improved: No more Glue needed - M4 Bolts & Nuts inserts design added - Backplate integrated in design - Intermediate plate improved - Holders design improved - Bottom design improved. What you need: - 3x M4 bolts (+/- 25mm). - 3x M4 inserts. - 3D printer ;) Assembly (See Post Print pictures below): > Insert 3x M4 inserts into the Top part. *** WARNING: Electricity is dangerous! Only do this if you know what you're doing! 1. Unplug all charges from power!!! 2. Cut cords from all 3 chargers. 3. Pull 1 wall plug cord through the hole on the side (bottom part). 4. Connect this wall plug cord to all 3 charges inside the bottom. 5. Hide cable that is to long in the bottom part. 6. Place intermediate plate on the bottom. 7. Put 3 charges in place on the intermediate plate. 8. Put Top cover on and Screw tight with 3 bolts. Tip: step 4.. Solder and use shrink tubing so the electric connection is good.