Oral-B Electric Toothbrush Head Cap

prusaprinters

<p>The Oral-B toothbrush heads always come without a cap, and it is a bit unhygienic. I designed this cover for it, and it is compatible with original and aftermarket ones.</p><p>The cover has a tight fit and uses just a few grams of material.</p><p>Just slide it on and you are good to go!</p><p>&nbsp;</p><p>Tips for printing:&nbsp;</p><p>The cap is 1mm thick, so based on your parameters choose which nozzle and other stuff is better for you. The holes on the sides are parallel to the bed if you lay it on the bed by the bottom, so they are easily printable using bridging. Unfortunately I cutted it at the end of the design in Fusion360, and I don't know how to orient it properly before exporting. But in PrusaSlicer is just 2 clicks of the mouse.</p><p>You don't need supports for the upper part. It will have a bit of dripping filament under it if the bridging settings are not perfects, but it doesn't affect the print and it is perfectly usable.&nbsp;</p><p>&nbsp;</p><p>Let me know if you like it, if you print one yourself (maybe upload a photo, I'll really appreciate it!), and also consider checking the other stuff I make on my profile. I'm still learning how to model things, but I have lots of ideas and I'll upload them soon!</p><p>If you also want to make a tip to me, I will really appreciate it, and<br>I'll think about continue making this stuffs 'cause I will know that<br>someone likes my design!</p>