OpenRC Truggy Parts for Killerbody SCT Body

prusaprinters

Here are some parts which where created or modified. Body mount Holder for wheels or a wing (holes are not perfectly aligned but you can use a drill to get it working) Wing Motor mount (modified to get the right distance between spur and pinion gear) For Killerbody SCT Body: http://www.ebay.de/itm/Killerbody-SCT-1-10-Karosserie-Short-Course-Truck-Monster-klare-Karo-HPI-Traxxas-/361272645748?hash=item541d871874:g:F4MAAOSwmfhX6M~F Steering plate, which needs a longer steering pin, but solves a not straight wheel when the suspension deflects. Rear bumber, you need M2x10 and M2x14 screws and M2 nuts for the bumber itself and some longer M3 screws for the mounting points. For mounting (see pictures) you need a part from http://www.thingiverse.com/thing:377994 Update 2017-04-03: Uploaded a modified Body Mount which is more durable. Update 2017-04-14: Uploaded the fan mount for motor cooling (it is a 40mm fan) https://hobbyking.com/en_us/turnigy-heat-sink-with-fan-for-36-series-motors.html Update 2017-05-04: Added a rear bumber which fits the Killer Body. Long test drive with quick overview at the beginning of the video: https://www.youtube.com/watch?v=uuYZCP5qVig Update: 2017-07-18: User SiScocsgo asked for pictures of my bag I'm using to prevent dirt and snow getting to the electronics. So I added some new pictures of it. I also added modified chassie parts, which a little bit longer than the one from Daniel Norée, because I used dog bones as axles from the mid diff to the front and rear diffs which are a little longer. I also modified the top rear chassie plate to have better access to the pinion gear, the battery and added mouting holes for the motor fan holder. Update: 2018-11-06: Uploaded snow tires and rim. I used silicon to glue the tire onto the rims because the TPU was not flexible enough for the normal Open RC Truggy rims. Tires are different in the middle section of the profile. If you have questions or need parts leave a comment or write a message. Thanks! Print Settings Printer: Geeetech Prusa I3 Pro B Rafts: No Supports: No Resolution: 0.2 mm Infill: 100 % Category: R/C Vehicles