OPENRC F1 front and rear Foam tire adapters
cults3d
These are Foam tire versions of the OPEN RC F1 rims that allow you to run Tamiya F103 Front and Rear Foam tires. The 2017 update for the F1 uses wider rear rims, with two types available: a narrow version designed for the original OpenRC F1, requiring slight trimming of the rear Tamiya tires to maintain their original width; and a 40mm Version that accommodates Full-size Tamiya F103 rear tires for increased grip and a slightly wider wheel track. You can pair these rims with: Tamiya 53129 (OP129) F-1 Rear 3645 HBR Soft Sponge Tires (1Pair) Tamiya 53134 F-1 Front 3630 HBR Soft Sponge Tires (1Pair) OP-134 Two rear rim designs are available: one for the Gear Diff from tahustvedt, and a standard rear rim. The front Tires are Narrow to fit both the narrow Tamiya F103 wheels and also the front suspension conversion from rhoagland. They will also work on the standard front. Print settings: 0.2mm resolution, no supports needed. Note: The Goodyear Eagle logo has been stamped onto the tires; Tamiya tires typically come blank without a logo. A new 40MM rear rim with 3mm inboard offset has been added, allowing for use of a full-size Tamiya rear foam tire and clearance from differential gears. This increases the rear track by 6mm overall (3mm per side), adding 6mm more width to each side, making the overall Width approximately 177MM. These rims remain compliant with the 2015 R.O.A.R rules, which allowed for a total of 190mm of width.
With this file you will be able to print OPENRC F1 front and rear Foam tire adapters with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on OPENRC F1 front and rear Foam tire adapters.