OpenR/C Speed Boat Accessory

pinshape

This is my entry for the OpenR/C Accessory Design Contest. I designed several components to transform this Formula 1 car into a speed boat. These components include: paddle_wheel.stl (print two of them with support for the inner spokes of the rim), rudder.stl (both rudders are in this file / print them with build platform only support), floating_tank_left.stl (print with the nose/front down, like in the last picture - no support), and floating_tank_right.stl (print with the nose/front down, like in the last picture - no support). The tanks have cavities inside, so do not print them with support, they will not swim. Print the tanks with a minimum of 3 shells to get them watertight, but keep in mind that they will become heavier. The rudder and wheels should be printed with 3 shells to make them stable. If you want to use this speed boat with electronics, you must get them watertight, for example, with some watertight housings. I do not have the electronics, so I cannot test this. I hope you like it. If you print these components, please upload some photos, thank you.