OpenLock 5.0 Tudor S Walls

cults3d

The OpenLock tavern is now taking shape! I needed to tackle the challenge of creating internal rooms, and the OpenLock "S" walls proved ideal for this task. Their slots for clips on all sides make for a stronger structure, especially when using springy clips, and also help in achieving an even edge with the standard wall width. This is a remix of Devon Jones' excellent Tudor Towne walls and floors. The floors are slightly higher than the originals but work seamlessly with them and have a far superior texture. I've only used the stucco walls as they were necessary for internal walls. You can find Devon's designs on Thingiverse at https://www.thingiverse.com/thing:3453131, https://www.thingiverse.com/thing:3457042, or in his collection https://www.thingiverse.com/devonjones/collections/openforge-2-towne-series. I'd like to extend my gratitude to Printable Scenery (https://www.printablescenery.com) for designing the incredible OpenLock system. Their base pack, including the OpenLock clip, can be found at https://www.thingiverse.com/thing:1833963. I've included a few photos of the tavern so far, although being OpenLock, it's constantly evolving! Some of the other parts in the photos are from excellent designs by Start2 and PropheticFiver. The following parts are contained within this thing: - Tudor_S_Wall: The standard 2x1 inch footprint wall - Tudor_S_Wall_Clips: The same 2x1 wall with slots at the end for OpenLock clips - Tudor_SB_Wall: The 4x1 inch footprint wall - Tudor_SB_Wall_Clips: The 4x1 wall with slots at the end for OpenLock clips - Tudor_II_Wall: A 1x1 straight wall - Tudor II_Wall_Clips: The 1x1 wall with clips on the ends - Tudor_IL_Wall: A 1x1 L-shaped corner with clip slots. Simply mirror it in your slicer if you want the opposite direction - Tudor_IT_Wall: A 1x1 T-junction wall with clip slots - Tudor_IX_Wall: A 1x1 cross-shaped wall, which was surprisingly easy to print but challenging to paint! I've only tested these files with Cura 15.04 and printed them on my Ender 3. Constructive criticism and comments are welcome; I'm still learning and have plenty to improve upon. Edit: I've also created doors that work seamlessly with these walls – you can find them at https://www.thingiverse.com/thing:3713775.