OpenGarage Enclosure V2

prusaprinters

<p>This is a remix of <a href="https://www.tinkercad.com/things/fSLeOxNVjwK-opengarage-enclosure">a TinkerCad design created by user rayshobbyshop</a>.</p> <p>It is an enclosure for board version 1.4 of the garage door controller from <a href="https://opengarage.io/">opengarage.io</a>. Other controller versions may also fit, but YMMV.</p> <p>Features...</p> <ul> <li>Designed to fit the OpenGarage v1.4 board.</li> <li>Uses M3x10mm socket cap screws so the case can mount flat against a surface.</li> <li>Back plate mounting holes are enlarged to accommodate #8 screws.</li> <li>Additional case holes added for the reset button, and screw terminals.</li> <li>Hole for 90°header pins on GP4/GP5/GND for external door sensors.</li> </ul> <p>With the header pins installed for an external door sensor, some additional finagling around the ultrasonic sensor holes may be needed to the get the board into the case.</p> <p>If you print with a translucent filament, it's possible to see the status LED on the ESP component.</p> <p>I have also made <a href="https://www.tinkercad.com/things/2qRHEHzTHSL">the remixed design available on TinkerCad</a> as well.</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Prusa</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>i3 MK3</p></div> <p><strong>Rafts:</strong></p> <p>No</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div> <p><strong>Resolution:</strong></p> <p>0.4 mm</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>10%</p></div> <p><strong>Filament:</strong> Atomic Filament PLA Translucent Smoke Black PLA</p> </p></p></p> Category: DIY