openBulletFeeder - Adjustable 1" Pipe Mount

thingiverse

This is an adjustable and lockable 1” pipe mount designed to work seamlessly with the openBulletFeeder. The new design has made significant improvements over the one included in the openBulletFeeder, addressing common fitment issues that users have experienced with the OBF file. The Bullet Feeder mount side has been modified to provide a snug and secure fit, ensuring optimal performance. To adjust the tilt angle of the mount, simply loosen and tighten the #4 screw on the plates until you achieve your desired position. Once you've made the necessary adjustments, lock it in place with the 1/4" bolt for added security. The kit includes two 1” mounts: one with a top plate and the other without. This allows users to choose the configuration that best suits their needs. The OBF nut has also been upgraded from a hex to a square nut for improved durability. Cutting the pipe and drilling the 1/4" hole can be the most challenging part of this project, but with careful planning and execution, you'll have a professional-looking result in no time. Printing settings: * Nozzle: 0.6mm * Layer height: 0.2mm * Pipe mount and OBF mount: 20% infill, 5 perimeters (top/bottom), 4 sides, with supports for the locking tabs. * Plates: 100% infill, 5 perimeters (top/bottom), 4 sides. Note: If using Slic3r, disable "Detect Bridging Perimeters" to add material to the bottom of the tabs. Components: * 3/4" (1" OD) black pipe and flange + Available on Amazon at https://smile.amazon.com/gp/product/B016Y8PXPS/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1 + Also available on Amazon at https://smile.amazon.com/gp/product/B01BTYTOG6/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 * 1/4" bolt (2-3/4” long) + Not typically found in stores, but can be ordered or substituted with a 3” bolt and washers + Available on Amazon at https://smile.amazon.com/gp/product/B003VG36JM/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 * 1/4" square nut + Available on Amazon at https://smile.amazon.com/gp/product/B07FLZX8Y8/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1 * Plate locking screw #4, 1/2", #4 washer, and lock nut + Available on Amazon at https://smile.amazon.com/gp/product/B07CKLNR2T/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1 Bullet Collator Files: * Available on Thingiverse at https://www.thingiverse.com/thing:4140331