Openbuilds v-slot X axis for Lulzbot TAZ 6 printers With integrated Z anti Wobble

thingiverse

This is the Taz 6 specific variant of the Openbuilds X axis rail modification, Anti-wobble edition. For the Non antiwobble edition, please try here: https://www.thingiverse.com/thing:2692604 Instructions are still being worked on. It's basically identical to the Taz 5 version, but with anti wobble pins and bearings and a few extra M5 M3 and M2 bolts and heat set inserts. Bill of Materials: Anti wobble: * 3/16" rods: + 8x 32mm * IGUS MYI-03-03 Flanged Bearing, 3/16 ID x 3/16 In L bearings (5 per pack - 4 packs, 2 spare bearings): + 16 * M5 heat set inserts: + 8 * M2 heat set inserts: + 4 X motor end: * M2 heat set inserts: + 4 * 20mm M5 cap head bolt: + 2 * 12mm M5 Cap head bolt: + 1 * M5 T slot nut: + 2 X idler end: * M3 heat set inserts: + 2 * 10-12mm M3 cap head bolt: + 2 * M5 T slot nut: + 2 * 20mm M5 cap head bolt: + 2 * 12mm M5 Cap head bolt: + 1 X motor mount: * 10mm M5 bolts: + 4 * M5 11mm Long Heat set inserts (McMaster Carr): + 6 * M5 T slot nuts: + 4 X motor mount plate: * 10mm M5 bolts: + 6 * 12mm M3 bolts: + 4 X idler mount: * Stock Lulzbot idler bearings, washers, Nut and 8mm bolt: + (stock parts) * M5 Heat set inserts: + 2 * M5 32mm bolts (idler adjusters): + 2 * M5 T slot nuts: + 2 * M10 M5 bolts: + 2 X Carriage adaptor plate: * M3 8mm bolts: + 4 * M3 heat set inserts: + 11 (short 3mm-4mm ones) * Stock Lulzbot V notch plastic piece (and associated parts): + (stock parts) Backplate: * 35mm long M5 low profile bolt: + 1 (Openbuilds part) * 35mm long M6 bolt (or ¼" bolt): + 1 * Printable spacers: + (various lengths, but generally 1/8") You will need much longer bolts if you are attempting to use the printed backplate. I still have metal backplates available. Openrails parts: * 60mm x 20mm Openbuilds linear extrusion 500mm long extrusion, manually remove 40mm: + (part number: http://openbuildspartstore.com/black-v-slot-linear-rail/) * Bearing wheels: + (sets of: http://openbuildspartstore.com/xtreme-solid-v-wheel-kit/ or other sets) * Spacers: + (6mm, part number: http://openbuildspartstore.com/aluminum-spacers/) * Eccentric spacers: + (6mm, part number: http://openbuildspartstore.com/eccentric-spacer/) * Gantry mounting plate: + (part number: http://openbuildspartstore.com/v-slot-gantry-plates/) * Flat head M5 Bolts and nuts 30mm: + (standard bolts will not fit, need the flat ones. ) * Longer if you plan to add the cable chain pieces The non antiwobble variant is the same, you just eliminate the wobble parts and add 2 more M5 heat set inserts per x endcap.