OpenAstroTracker tripod

thingiverse

Update of the 09/12/2022: Addition of: - "Test in 20x20-17", "Test out 20x20-17", "Leg_base 20x20-17" and "Foot_TI 20x20-17" for new compatibility with tubes of 20x20mm out, and 17mm in. - "Foot_TI" to replace "Foot" and "Martyrdom". It needs M4 heat install brass inserts instead of the M4 nuts. ************************************************************************************** Initial: I designed this tripod for the OpenAstroTracker with the AutoPA addons. I have tested successfully this tripod with 9kg on it. I recommand to test it for your load with a margin first of all. The assembly needs: - 12 screws M5, length depending of your woodboard thickness (30mm for a woodboard of 15mm) - 12 washers M5 - 12 nuts M5 - 3 screws M6 40mm domed head with square neck - 3 nuts M4 - 3 screws M4x12mm - 3 threaded rods M10, length as you want (180mm in my case) - 3 nuts M10 - 3 square tubes in aluminium of 400mm length, sold as 20x20mm (in reality 19.41mm out and 16.5mm in) - 3 grab knobs: https://www.thingiverse.com/thing:5444944 You can check the compatibility with your tubes using the "Test in" and "Test out" things. I have added for accessories the following drawer: https://www.thingiverse.com/thing:5025903