Open Sim Wheel - Control Box Face Plate

thingiverse

I only used a 4" hole saw and wanted my parts to look more professional without using a dremel. My V2 universal faceplate includes space for a Speakon, available here: http://www.amazon.com/gp/product/B00067JSFA?psc=1&redirect=true&ref_=oh_aui_search_detailpage%0Dhttp://www.amazon.com/gp/product/B002BERXW6?psc=1&redirect=true&ref_=oh_aui_search_detailpage%0D My 2 hours to pass through USB included a 4" hole saw for a professional look. I plugged the Granite board into the USB pass-through, allowing me 2 usb ports on the back of my box and reducing concerns about breaking the SMV board. The 2 fuse holes have an 8 and a 10 in the print to prevent them from being switched up. The USB and Granite are also labeled out for easy identification. I use a DB25 on the face and the encoder wire, which wires back to the Dennis board and uses a DB15 internally. The female solder adapter I'm using is found here: http://www.amazon.com/Computer-Female-Solder-Adapter-Converters/dp/B00FH85VX6/ref=sr_1_1?ie=UTF8&qid=1445890955&sr=8-1&keywords=db25+female My USB pass through includes the Neutrik NAUSB-W, available here: http://www.mouser.com/ProductDetail/Neutrik/NAUSB-W/?qs=%252b86TLfaev2%2FHtEQBGCrhIg%3D%3D&gclid=Cj0KEQjwnrexBRDNmZzNkf7c4c4BEiQALnlxhamQZIf1rgxgc5id18EA1IweFsgbpZB98OCbqiSqsg4aArKH8P8HAQ For my fuses, I use these:http://www.amazon.com/gp/product/B00HG9SFKK?psc=1&redirect=true&ref_=oh_aui_detailpage_o09_s00. My switches are these: http://www.amazon.com/gp/product/B00E0L224C?psc=1&redirect=true&ref_=oh_aui_search_detailpage Print Settings: Rafts: Supports: No Resolution:.25 Infill: 60% Notes: Used ABS, 80mm/80mm speed, 3mm thick, 3 walls.