Open Frame1 Case No Pla Weld

thingiverse

EDIT: I've updated the model and moved the deprecated description to the bottom of this summary. Some updates I've made: Adjusted the dimensions to potentially fit the Frame1 case. Depth of the buttons now is better suited from F1 keycaps Made the centerclip not fully connect and adjusted the backplates accordingly. This will improve stiffness of the backplates. Removed the supports on the keyswitch socket. Now prints well without them. The middle sockets do need supports. Updated links to Haystack's NoCap keyswitches (flat top) [6] and Bjart's Keyswitches (little rounding) [7] I also included the .step files in a 7zip folder without the fillets. Also the old .stl files are included in a .7z as well. Thanks to gregturbo for open sourcing a Frame1 PCB [1]. I designed this case around that PCB while heavily being inspired the fake1s on this site [2][3].There are M2 washers for the back of the PCB where they attach to the case. Some print settings: Supports are not needed for the print sockets on left.stl and right.stl. Supports are needed for the overhanging lips, USB-C port, and the middle (start button) keyswitch sockets on left.stl and right.stl. Print the middle piece on its side. No supports needed I used M2 screws [4] and 5mm standoffs [5] for the screw holes. Just pushed em in with my Solder Iron. Overall I'm pretty happy with how it turned out. Deprecated description: Thanks to gregturbo for open sourcing a Frame1 PCB [1]. I designed this case around that PCB while heavily being inspired the fake1s on this site [2][3]. I also used the button profiles from the linked thing. There are M2 washers for the back of the PCB where they attach to the case. The filamentpusher.stl is used to push out the filament used for support on the keyswitch sockets. [1] https://github.com/GregTurbo/Open-Frame1 [2] https://www.thingiverse.com/thing:5172230/files [3] https://www.thingiverse.com/thing:4917086 [4] https://flashquark.com/product/m2-panhead-screws-4mm-20-pack/ [5] https://flashquark.com/product/m2-standoffs-5mm-20-pack/ [6] https://github.com/JonnyHaystack/NoCap/raw/master/ Button DL link: https://github.com/JonnyHaystack/NoCap/raw/master/NoCap_20.64mm.stl [7] https://cdn.discordapp.com/attachments/896551555526979584/979204857384812694/keycap_20.5_f1_resin.STL