OneWheel Pint handle (replacement)

prusaprinters

<p>MagHandle on my OneWheel Pint broke (great design OneMotion!).<br>Instead of replacing it with stock one I decided to try a 3D printed one.<br>Handle is designed around two stop rings (5 mm inner diameter, 10 mm outer diameter, M3 setscrew) and two M3x14 (or M3x16) screws to transfer weight from D 5 mm axis (smooth rod).<br>You can use D 5mm magnet to hold handle in position in similar fashion as original one but as the new handle is pretty tigth fit it is not usually necessary.</p><p>2022.03 - V2 - A bit more rounded design of handle</p><h3>Print instructions</h3><p>1) Print with enough infill.<br>2) (Super)Glue two parts together.<br>3) Glue in 5 mm magnet<br>4) Insert stop rings D5/10mm. Use M3x14 screws instead of setscrews. Screws shall not protrude into inside of free space in the stop rings (otherwise, you will not be able to insert axis)<br>5) Install handle - use D5mm (60-65 mm long) smooth rod as axis</p>