
OneWheel Controller Box for uBox 75v
thingiverse
This is a very remixed FlowGlider universal hobby box, designed to fit the Spintend uBox 75v single, w/provided power button while keeping the stock headlight and handle. Use original connectors. It has a shelf to fit the Spintend BLE adapter, a 1mm thicker bottom, wire reliefs under the box, pockets sized to accept 1 size of insert; 9.5mm. I opted for an XT90 charge port. Reinforced bits and bobs here and there. It uses a 1.5mm thick lid as a heat spreader and you'll need to use some heatsink paste. You could even use an existing FlowGlider lid and drill two extra holes, which is what that mystery hole is from! You need to countersink your screw heads well as there is little extra room in the rail. It is also meant to use a liquid gasket such as a polyurethane elastomer (Sikaflex, Dicor...) or silicone and not a solid gasket. Or yolo no gasket at all. You have to trim down the headers of the Switchcraft plugs quite short to make things work but plenty to solder onto and make a solid connector. USB port is not accessible. YAW OFFSET 0 You'll also need the remixed FG connector cover as well. It was physically impossible to plug in my motor in the original FG spot, so I ended up moving the connector back to nearly stock position. As such, an adjustment to the cover needed to be made. I also included a lid template that makes the lid really easy to cut out. The FG lid has dem curves, but this one is simple for DIY. Original: https://www.thingiverse.com/thing:5417290 uBox 75v single: https://spintend.com/products/75v-100a-single-esc-single-ubox-based-on-vesc Used these inserts for all 4 holes. Make sure your soldering iron doesn't poke through the insert and poke a hole through the box. https://www.amazon.com/dp/B08WC7S714?psc=1&ref=ppx_yo2ov_dt_b_product_details 6.9mm od, 9.5mm length. Used this aluminum stock to make the lid. https://www.amazon.com/dp/B0B8NLBZLZ?psc=1&ref=ppx_yo2ov_dt_b_product_details Used these XT90 panel mounts. https://www.amazon.com/gp/product/B09GFCPZFY/ref=ppx_yo_dt_b_asin_title_o01_s04?ie=UTF8&psc=1 Motor connector: https://www.digikey.com/en/products/detail/molex/0194280012/863315 Battery connector: https://www.digikey.com/en/products/detail/molex/0194280016/3044517 (or https://www.digikey.com/en/products/detail/molex/0194270049/3044516 if they are ever in stock) Footpad/Hall connector: https://www.digikey.com/en/products/detail/switchcraft-inc/EN3P6MX/2080472
With this file you will be able to print OneWheel Controller Box for uBox 75v with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on OneWheel Controller Box for uBox 75v.