OnePlus Two Usb Dock (For One Plus Two)

thingiverse

This is a Simple OnePlus Two USB Dock that utilizes the Included USB-Cable of the Opt. \nWhen You Print this Model Yourself, Don't Forget to Share a Photo of Your Make Here! If You Have Any Questions or Suggestions, Just Write in the Comments. :) \nGreetings from Germany,\nnexster.\nPrint Settings\nRafts:\n Doesn't Matter\n \n Supports:\n Yes\n \n Notes: \n Use High Infill for at Least the Upper Part. How I Designed This I designed this dock because there were none available on Thingiverse or somewhere else. I used Fusion 360 to make the model. Compatibility There is a chance that this dock will work for other mobile phones. The OnePlus One won't fit, because it's 1mm wider than the OnePlus Two. Maybe I'll make a second version for the OnePlus One. Please notice: This dock won't fit the OnePlus Two with a case! The dock is built around the dimensions of the OPT without a case. Progress Oct 31, 2015 First Prototype Nov 1, 2015 Added More Space on the Side So OPT Can Slip in Easily. Reduced Space in the Front so the OPT can't wiggle Around. Changed the Design so the Front Buttons and Power Button of the OPT can be reached Easily. Nov 1, 2015 // 2 Design Printed and it Fits! So I call this finished :)\ Instructions Print the Two Included Parts. Route the Cable from the Back into the Dock and bring it to the top through the hole. It's USB-C, so in the end it doesn't matter which way! Push the cable to the top until the plug sticks out (see pictures). Secure the Cable with the Second Part You Printed. It will rest into the printed notch in the Front of the dock (you have put the Cable in there Earlier). It's pretty self-explaining, I'm sure you're going to find out how to assemble the Dock. :3 P.S: Maybe you will have to sand the part that holds the cable in place a bit. It is pretty tight without sanding. If you sand it a bit, you will be able to get your Cable out again. ^^\ If Your Device Pulls the Cable Out of the dock when unplugging just fix the cable to the dock with some double-sided tape. It's best to stick some double-sided tape where the Cable exits the Dock on the back and then press the cable on to the tape. If you want, you can Fix the Plug directly with some double-sided Tape in the dock itself or even glue it. This way it will stay in place. If you Want, You can stick Some Bookbinding Cloth or Something Similar on the Inside where the OPT Slides. It looks better and the OPT won't get any Scratches!