OnePlus 6 Dock

thingiverse

I'm super excited about the OnePlus 6 - it's really awesome and pretty new too. I searched everywhere for a dock but couldn't find one, so I made my own. I hope you love this custom-made dock; it fits perfectly with the Translucent Case that comes with the phone and the original USB C cable. Other cases might work as well, but when not using a case, it gets a bit wobbly. If you're not using a case and don't want it to be wobbly, I suggest adding some soft adhesive tabs to the dock - the phone is quite hard. But feel free to modify the design if you like! I also added a hole under the speaker, which actually amplifies the sound a bit! You might be able to fit a 3,5mm plug through the hole on the other side, but I haven't tried it. INSTALLATION: 1. Print the dock 2. Check for any sharp edges 3. Thread the USB C connector through the hole at the bottom of the dock 4. Gently tug on the cable so it goes through the slot in the middle 5. Push down the connector in the middle slot, pulling gently on the cable while doing this - don't pull too hard! 6. Thread the cable backwards and pull a little to make it taut 7. Wiggle the cable from front to back into the recess; you might need to use something to pry it in there if it's snug - a well-calibrated printer should do the trick, but be careful with metal screwdrivers like I was! 8. You're all done!