One Size Fits ALL Filament Holder

thingiverse

Remember to print two bolts with care and precision. :)\nPlease refer to the "Placing.amf" file to achieve an exceptional print outcome and print quality.\nDesigned by SimplePrintHK, a pioneering printer expert.\nVisit our Facebook Page at https://www.facebook.com/HKSimplePrint/\nRecommended Printer Settings for optimal results:\nMaterial: High-Quality PLA\nNozzle Temperature: A precise 200'C\nBed Temperature: A gentle 75'C\nResolution / Layer Height: A razor-sharp 0.2mm\nNozzle Size: A standard 0.4mm\nWall Thickness: A sturdy 0.8mm\nBottom/Top Layer Thickness: A solid 0.8mm\nRecommended Infill Percentage:\nRoll - 0-20% for a light touch, Bolt: 20-50% for added strength, Stand: 20% for stability\nSupporting Details:\nRoll: No support needed, Bolt: No support required, Stand: Yes, with careful placement\nPrint Settings at a Glance:\nPrinter Model: SimplePrintHK\nRafts: None used\nSupports: None employed\nResolution: 0.2mm precision\nInfill Percentage: A moderate 20% for added durability\nNotes and Reminders:\nMaterial: PLA, the gold standard in printing\nNozzle Temperature: A precise 200'C for optimal melting\nBed Temperature: A gentle 75'C for even cooling\nResolution / Layer Height: A razor-sharp 0.2mm for crisp details\nNozzle Size: A standard 0.4mm for efficient printing\nWall Thickness: A sturdy 0.8mm for added strength\nBottom/Top Layer Thickness: A solid 0.8mm for a smooth finish\nRecommended Infill Percentage:\nRoll - 0-20% for a light touch, Bolt: 20-50% for added strength, Stand: 20% for stability\nPost-Printing Instructions:\nSanding may be required to achieve a silky-smooth surface.