Omzlo PiMaster Case for Raspberry Pi 2 and 3 model B boards

myminifactory

This is a 2-part case designed for a Raspberry Pi with an Omzlo PiMaster HAT attached on top. It uses the standoffs and screws provided with the PiMaster, along with four M2.5x8 countersunk screws to secure it in place. Two screws are fastened from the bottom to the 40-pin side of the standoffs, while two screws are secured from the top to the case to hold the cover firmly in position. The top screws will form threads on the printed case. To ensure a smooth print job, make sure your bridging settings result in clean bridges for the ports. For added visibility, I printed the cover using a translucent material, allowing the onboard LEDs on the PiMaster to shine through. Please note that the latest Raspberry Pi 4 model has a slightly different port layout, making this design incompatible at present. Future updates will include alternative versions compatible with the Raspberry Pi 4, as well as enclosures for CANZERO nodes and shelves with extra mounting options for containers used in an IoT Arduino aquaponics project. This is just the starting point of a larger project that combines IoT Arduino and Raspberry Pi platforms. More information about Omzlo and the NoCAN platform can be found at https://www.omzlo.com/. I am not affiliated with Omzlo and this post is part of the Craftbot competition.