Olight L-dock Desktop Charger

thingiverse

Hi Guys, I have a few Olights and got an L-dock with one of them. I was not sure where to mount the L-dock as it requires two screws to mount. It has just been lying around so I decided to turn it into a dedicated desktop charger instead. Requirements: 1 x Olight L-dock 2 x M3 Button top hex - M3 x 5mm 2 x M3 Nuts The model is not perfect but is functional, the L-dock simply slots into the rear of the print and is secured using 2 x button top hex screws M3 x 5mm should work. I only had 8mm so they stick out the back a little. Compatibility: Should be compatible with most magnetic tail charging Olights, I have tested with the S2R Baton II, Seeker 2 Pro and Warrior X 3 with the warrior ring attached and there is ample space for thicker flashlights. See photos attached. The charging cable simply sticks to the bottom of the L-dock, under the base and if you need the charging cable for work, or to charge in the car, it simply pulls off so you may use it independently.