Okhotnik Speed Wing

thingiverse

This is a collection of parts for a high-performance, stable 30" FPV racing wing. The intention is to create an extremely fast and agile 6s racing wing. Hot-wire templates are provided in the files, consisting of a 9" MH70 aerodynamic root section, a 7" MH60 middle panel, and a 5" MH44 tip section. I used hot-wired pink rigid insulation foam (Fomular 150 - 1.5") to create mine. The motor mount slots onto the back of the wing and can be secured with adhesive. The rear-most spar should be positioned 20mm forward of the trailing edge. Two M3 through holes are provided for mounting standard or small base quadcopter motors to the mount (16mm C-C). The camera pod is designed to accommodate Micro format cameras, and the Caddx Turbo S2, Foxeer Falcor Micro, and Foxeer Monster Micro have been confirmed to fit. Simply tip the camera in and pack foam from the camera's packaging behind it. Carbon spars and lamination film are recommended for construction, and elevon size and shape are relatively free-form. Please follow the layout diagram and adhere to the suggested center of gravity location. To modify the wing or check dimensions, visit the link below to the eCalc CG page: https://www.ecalc.ch/cgcalc.php?deeplink=SBach%20342%20(Example);in;9;7;5;0;0;0;4;12;0;0;0;5;10;0;0;0;d;17.5;17.5;24.5;14;12.6;0;0;0.75;3;4;0;4;7;24;1;0;88;25;10; Recommended standard wing and quadcopter components include: Battery: 4s 1550 - 6s 1000 Motor: 1800kv-2450 kv (2306 or 2207 minimum) ESC: 30-40A Propeller: APC 4X4.5 - APC 5.5X5.5 - APC 6X4 Servos: 9 Gram Metal Gear FPV: Optional, user preference. A Micro camera is required to use with the included mount