Oil Pickup extension for the EJ20 Subaru Engine

thingiverse

This is a custom Oil Pickup extension designed specifically for the EJ20 Subaru Engine, available on Thingiverse under the identifier 2451310. My completed project showcases this unique design: https://www.thingiverse.com/make/719585 # Print Settings: 1. OilPickup: Layer height set to 0.15mm, raft enabled, support material used, and infill density at 100%. 2. OilPickupCap: Layer height set to 0.15mm, raft disabled, support material used, and infill density at 100%. 3. OilPickupGasketPart1: Layer height set to 0.15mm, raft disabled, no support material used, and infill density at 100%. 4. OilPickupGasketPart2: Layer height set to 0.15mm, raft disabled, no support material used, and infill density at 100%. # Accessories: 4 x m2x6mm SHCS screws are required for assembly. # Mounting Instructions: 1. Attach OilPickupGasketPart1 and OilPickupGasketPart2 to OilPickup using a suitable adhesive. 2. Securely fasten OilPickupCap to OilPickup using the same adhesive method. 3. Drill 4 holes of 1.4mm diameter in the Driver Side Valve Cover, referring to the attached picture for accurate positioning. Exercise caution to avoid damaging the surrounding housing. 4. Fasten OilPickup part securely onto the Driver Side Valve Cover using the provided m2x6mm SHCS screws without over-tightening.