ODROID N2/N2+ Wall Mount

prusaprinters

<p>This bracket for the ODROID N2/N2+ makes it super easy to mount on a wall. This version improves on the <a href="https://www.thingiverse.com/thing:4982381">original design</a> by introducing a sacrificial layer for the mounting holes which eliminates the need for supports when printing.&nbsp;</p><p>This version also increases the distance between the N2/N2+ and the wall which allows for better airflow across the heatsink. If one wishes to mount the N2/N2+ closer to the wall, simply split the model at the desired height in your favorite slicer prior to printing.</p><p>Secure the left and right brackets to the N2/N2+ heatsink with four M3 x 30mm screws.</p><p>If you are looking for a printable case for the N2/N2+ check out my case <a href="https://www.printables.com/model/148056-odroid-n2n2-case">here</a>.</p><p>The <a href="https://ameridroid.com/products/odroid-n2-plus">OROID N2/N2+</a> is a fantastic single board computer with roughly 2x the power of a Raspberry Pi 4. The N2+ powers the Home Assistant Blue device and I highly recommend it.</p><h5>Printing</h5><ul><li>Print in PLA, PETG, or PC. If the N2/N2+ will be in warm conditions or overclocked consider using a heat-tolerant filament like PETG or PC instead of PLA.</li><li>Print using a .2 or .3 layer height.</li><li>Use 4-6 perimeters/shells.</li><li>STLs are pre-positioned in the correct print orientation.</li><li>Supports not required.</li></ul><p>Happy Printing!</p>