Odroid C2/C1+ Case (60mm cooling fan)

thingiverse

Another Odroid case I designed and built. It fits a C1 perfectly. This one is specifically for a 60mm cooling fan that's only 11mm thick. It requires four small screws - two 2.5mm diameter, four to six millimeters long screws with a maximum five-point-two millimeter diameter head. The other case I designed was too large and bulky, with an open funnel that sucked in air and dust, so I wanted to fix that problem. I didn't want the fan face down on the heatsink because it would just suck in dust from the top onto the board. Instead, I designed it so that it draws air from one side to the other without being too tall. Included in the files is a 60mm fan and a mock-up of the Odroid C2 for anyone who wants to use it to make their own version. ---- Settings ----- I printed at a 0.2 millimeter layer height. Base.stl Support infill percentage: 100% Horizontal offset from part: 0.5mm ^^^^ Use those settings to make removing the support structures easier on the Base.stl file.